Introduction to the manufacturing process of wear-resistant cast basalt plate by the manufacturer of cast basalt plate

For the knowledge of cast basalt slab, what we should know is that the matrix construction process of wear-resistant cast basalt slab is water glass mastic lining. The prepared mastic shall be used up within 30 minutes. Liquid shall not be added during use. If the mastic is hard, it shall be discarded. Good acid resistance. Due to the low SiO2 content of wear-resistant cast basalt plate, it will form a protective film after melting and crystallization at high temperature, so that the chemical corrosion degree of the medium is close to zero. Except for hot phosphoric acid and hydrofluoric acid exceeding 30 ℃, wear-resistant cast basalt plate has good corrosion resistance compared with all inorganic acids, alkali accumulation, salts, water and organic solvents. The wear-resistant cast basalt slab has strong acid and alkali resistance. Experiments have proved that it has no loss when placed in high concentration sulfuric acid solution and sodium hydroxide solution for a long time. Its acid-base corrosion resistance function is 15-25 times that of acid-resistant ceramic tile, porcelain plate, granite, stainless steel and polymer materials. It can be used normally even in the environment of frequent replacement of acid-base.

In addition, we should also know that the wear resistance of wear-resistant cast basalt plate is 7-8 times higher than that of manganese steel and 15-20 times higher than that of cast iron. The uneven color of wear-resistant cast basalt plate may be caused by impure production raw materials or some manufacturing link. Check whether there are pollutants on the equipment hopper, When purchasing products, pay attention to selecting reliable manufacturers.