How can the manufacturer of cast basalt valve do a good job in daily maintenance during the use of cast basalt pipe?

Cast basalt pipe, cast basalt pipe manufacturer. The technical management in the application of cast basalt pipe by pipe manufacturers is often ignored. However, the social experience of many basalt casting pipe and valve processing plants and mining of basalt casting pipe and valve has confirmed that improving the work of basalt casting pipe is one of the indispensable countermeasures to improve the practical effect of basalt casting pipe application. Only at this stage, the work experience in this industry is still lack of a summary of system software. Here are some common questions for reference only.

1. If the closed coal hopper and chute are found to be blocked, it is forbidden to hit the surface wall with a hammer, which will break or fall off the cast basalt jaw plate. The position that will cause material blockage shall be embedded with a poke opening that can be opened and closed at will, so as to solve the material blockage.

2. For coal hopper and chute that will infiltrate block raw materials and high-speed machinery and equipment that will infiltrate broken iron, bricks and other dirt, grate plate, stainless steel screen or electromagnetic induction iron removal equipment shall be set at its feed inlet to avoid hard dirt infiltrating into the machinery and equipment and smashing the cast basalt slab

3. Full time personnel shall be assigned to undertake the installation and maintenance of cast basalt products. Remove and replace the cast basalt pipe damaged in application and repair the falling place of cast basalt jaw plate anytime and anywhere, so as to avoid the expansion of the total damaged area and ensure the normal operation of machinery and equipment.